SUNV3-S-16
SUNV 1 in. Outside Diameter, Polytetrafluoroethylene (PTFE) Packing, 6000 psi Pressure Rating Union Bonnet Needle Valve
Specifications
| Cv Coefficient | 2.2000000000000002 |
|---|---|
| End Size | 44198in |
| End Size 2 | 44198in |
| End Type | Male National Pipe Thread (MNPT) |
| End Type 2 | Female National Pipe Thread (FNPT) |
| Inch/Metric | Inch |
| Orifice Diameter | 11mm |
| Temperature Rating with Graphite Packing | -53 to 648?C, -65 to 1200?F |
| Temperature Rating with Polychlorotrifluoroethylene (PCTFE) Stem Tip | -53 to 93?C, -65 to 200?F |
| Temperature Rating with Polyether Ether Ketone (PEEK) Packing | -53 to 315?C, -65 to 600?F |
| Temperature Rating with Polytetrafluoroethylene (PTFE) Packing | -54 to 232?C, 65 to 450?F |
Dimensions
| Dimension A | 50.0mm |
|---|---|
| Dimension B1 | mm |
| Dimension B2 | mm |
| Dimension C | mm |
| Dimension D1 | 47.6mm |
| Dimension D2 | mm |
| Dimension E1 | 17.5mm |
| Dimension E2 | mm |
| Dimension F | 89.0mm |
| Dimension H1 | 123.1mm |
| Dimension H2 | mm |
| Dimension I | 26.2mm |
| Dimension L | 100.0mm |
Description
(SUNV3-S-16)
SUNV 1 in. Outside Diameter, Polytetrafluoroethylene (PTFE) Packing, 6000 psi Pressure Rating Union Bonnet Needle Valve
Compact design Low operating torques Panel mountable Straight and angle flow patterns Non rotating vee stem tip Three stem type are available
Compatibility
This part may be used in place of the following parts from other manufacturers:
| Swagelok® | SS-12NBS16 |
|---|