SHCV2-F-8N-10P-MR
SHCV 1/2 in. Female National Pipe Taper (FNPT) #10 psi Nominal Cracking Pressure Spring, National Association of Corrosion Engineers Rated, 4600 psi Working Pressure Check Valve
Specifications
| Back Pressure at 70 (20 ?C) Temperature | 316bar, 4600psig |
|---|---|
| Cv Coefficient | 1.8 |
| End Size | 44198mm |
| End Type | Female National Pipe Thread (FNPT) |
| Inch/Metric | Inch |
| Nominal Cracking Pressure | 0.68bar, 10psig |
| Operating Pressure [Min] | 316bar, 4600psig |
| Orifice | 7.8mm |
| Reseal Pressure [Min] | 0.20bar, 3psig |
| Temperature Rating for Ethylene Propylene | -45 to 148?C, -50 to 300?F |
| Temperature Rating for Fluorocarbon (FKM) | -23 to 190?C, -10 to 375?F |
| Temperature Rating for Nitrile Butadiene Rubber | -23 to 121?C, -10 to 250?F |
Dimensions
| Dimension A | 77.0mm |
|---|---|
| Dimension B | mm |
| Dimension h | 1-1/16in, 26.9mm |
Description
(SHCV2-F-8N-10P-MR)
SHCV 1/2 in. Female National Pipe Taper (FNPT) #10 psi Nominal Cracking Pressure Spring, National Association of Corrosion Engineers Rated, 4600 psi Working Pressure Check Valve
Pressure rating up to 6,000 psig (413 bar) at 100 ?F(37 ?C) Temperature rating up to 375 ?F (190 ?C) with Fluorocarbon (FKM) seal standard Cracking pressure fixed from 1/3 to 25 psig (0.02 to 1.7 bar) Variety of end connections 316 stainless steel body material as standard Each and every valve is tested at the factory
Compatibility
This part may be used in place of the following parts from other manufacturers:
| Swagelok® | SS- |
|---|